ICD-10: Prep Yourself for New Hyperlipidemia Codes

When ICD-10 goes into effect in 2013, high cholesterol will still be a challenge for your patients. Here’s a look at how coding for this, and similar diagnoses, compares between ICD-9 and ICD-10.

ICD-9-CM Codes:

  • 272.0, Pure hypercholesterolemia
  • 272.1, Pure hyperglyceridemia
  • 272.2, Mixed hyperlipidemia
  • 272.4, Other and unspecified hyperlipidemia

ICD-10 Codes:

  • E78.0, Pure hypercholesterolemia
  • E78.1, Pure hyperglyceridemia
  • E78.2, Mixed hyperlipidemia
  • E78.4, Other hyperlipidemia
  • E78.5, Hyperlipidemia, unspecified

Change: ICD-10 offers a one-to-one code match with ICD-9 for pure hypercholesterolemia (272.0, E78.0), pure hyperglyceridemia (272.1, E78.1), and mixed hyperlipidemia (272.2, E78.2). But where ICD-9 offers one code for “other and unspecified hyperlipidemia” (272.4), ICD-10 offers one code for “other” (E78.4) and a different code for “unspecified” (E78.5).

Documentation: Your clinicians’ documentation shouldn’t need to change from its current form. All you need to do as a coder to capture this already present information is to format your superbill to capture the difference between “other” and “unspecified” hyperlipidemia. “Other” means the physician documented the type, but ICD-10 doesn’t offer a code specific to the documented type. “Unspecified” means the physician did not document the type of hyperlipidemia.

Bonus tip: The notes with the ICD-9 and ICD-10 codes for lipid metabolism disorders are very similar, but there are a few differences. For example, while 272.1 includes “hypertriglyceridemia, essential,” E78.1 includes “elevated fasting triglycerides.”

Under E78.2, ICD-10 adds “combined hyperlipidemia NOS,” “elevated cholesterol with elevated triglycerides NEC,” and “Hyperlipidemia, group C.” Code E78.2 also has an Excludes1 note, telling you instead to code E78.4 for “familial combined hyperlipidemia” and E78.5 for “cerebrotendinous cholesterosis [van Bogaert-Scherer- Epstein] (E75.5).”

Remember: When ICD-10 goes into effect on Oct. 1, 2013, you should apply the code set and official guidelines in effect for the date of service reported. Learn more at www.cms.gov/ICD10/ and...

Comments Off on ICD-10: Prep Yourself for New Hyperlipidemia Codes

Ensure Compliance With ICD-10 With These 3 Tips

When ICD-9 becomes ICD-10 in 2013, you will not always have a simple crosswalk relationship between old codes and the new ones. Often, you’ll have more options that may require tweaking the way you document services and a coder reports it. Check out the following examples of how ICD-10 will change your coding options when the calendar turns to Oct. 1, 2013.

Celebrate Sinusitis Codes’ One-to-One Relationship for ICD-10

When your physician treats a patient for sinusitis, you should report the appropriate sinusitis code for sinus membrane lining inflammation. Use 461.x for acute sinusitis. For chronic sinusitis — frequent or persistent infections lasting more than three months — assign 473.x.

For both acute and chronic conditions, you’ll choose the fourth digit code based on where the sinusitis occurs. For example, for ethmoidal chronic sinusitis, you should report (473.2, Chronic sinusitis; ethmoidal). Your otolaryngologist will most likely prescribe a decongestant, pain reliever or antibiotics to treat sinusitis.

ICD-10 difference: Good news. These sinusitis options have a one-to-one match with upcoming ICD-10 codes. For acute sinusitis diagnoses, you’ll look at the J01.-0 codes. For instance, 461.0 (Acute maxillary sinusitis) translates to J01.00 (Acute maxillary sinusitis, unspecified). Code 461.1 (Acute frontal sinusitis) maps directly to J01.10 (Acute frontal sinusitis). Notice how the definitions are mostly identical. Like ICD-9, the fourth digit changes to specify location.

For chronic sinusitis diagnoses, you’ll look to the J32.- codes. For instance, in the example above, 473.2 maps direction to J32.2 (Chronic ethmoidal sinusitis). Again, this is a direct one-to-one ratio with identical definitions. Like ICD-9, the fourth digit changes to specify location.

Physician documentation: Currently, the physician should pinpoint the location of the sinusitis. This won’t change in 2013.

However, you’ll scrap the 461.x and 473.x options and turn to J01.-0 and J32.- in your ICD-10...

Comments Off on Ensure Compliance With ICD-10 With These 3 Tips

How Do I Code a 2-Sided Nosebleed?

Heads up: 2 nosebleed codes are not the answer. Question: A patient reports to the ED after sustaining injuries during a soccer match; she was hit in the face with a ball, her nose is bleeding, and her right eye is blackened. The physician is not able to stop the bleeding with ice or pressure, so [...] Related articles:

  1. Is 30901 Your Nosebleed Code? Not So Fast?Hint: Look for these keywords in the note to select...
  2. Winter Laceration Repair: How Do I Code For Dermabond?Warning: Your coding will vary depending on who’s getting the...
  3. How Do I Code This Multiple Fracture Accident Patient?Question: A 30-year-old female presents to a rural ED with...

Comments Off on How Do I Code a 2-Sided Nosebleed?